Thursday, 27 June 2013

Zaghouan, Tunisia, May 1943

This is an old game, I just stumbled upon over on The Guild forum

Elements of groupe Blinde sud Tunisien push south east through the Zaghouan range to link up with British columns driving driving north; at a small village they bump into a German blocking force.

A straight forward attack-defence battle, except for the interesting kit fielded by the French :)

Table top
French initial moves - Latils by S&S, Citroen by Frontline, Valentines Fujimi [yes i know they are MkIIIs and not MkVIs, I`ve recently re-painted them back as British and will replace them when I find suitable models]
GMC75 Sgt`s Mess & S&S, M3s Matchbox, Laffly AC Raventhorpe Image
German defenders
Latil 4x4 disappears - boom!Image
Chars de Valentine commander by AB Figures
GMC SP 75mm S&S, crew FAAImage
Another GMC75 Sgt`s Mess, crew from Blitz Minitures, 2 - Matchbox M3 lt tanks commander by Britannia attached to the French from the US 70th Tank Battalion
French infantry advance, mostly Blitz, but some FAA and Tumbling Dice too
French support
75mm Skytrex with Frontline Somua and SHQ crew
47mm AT gun from S&S with Blitz crew, the tow is a Dinky Scamell :), the Latil 6x6 moving past is S&SImage
Somua S35s from Frontline advance past burning French transport
Slugfest a GMC halts next to a burning M3, whilst other vehicles move towards the sawmill
A Panzer III burns in the village whilst a Laffly AC looks on hiding from the mkIV on the hill

Another cracking game, the Germans had advantage of range with their long 75s and 120mm mortar, but they lacked infantry. The French concentrated their attack on the right after looseing some transport (and men) on the road. The Valentines got into a duel with a Panzer IV, both being damaged (one abandoned) but repairable, the GMC 75s proved highly effective tank-killers claiming 2 - PZIVs and a PZIII and supressing the Pak40 too, both Stuarts were lost, the commanders tank in a spectacular explosion, the S35s proved too slow to get into across the table to where their 47mm would be effective.....

The German infantry held out for a little while, but once their armour was gone, they had little chance. One MG team was successfully taken out by a French VB grenade launcher, which was quite pleasing :)

Wednesday, 26 June 2013

SOTCW Journal #79

Arrived this morning :D

In this new issue you will find -

Eastern Front mini-campaign
Battle of Gallabat (Sudan 1940)
Rules for Between the Wars
Battle for St. Cloud (Operation Torch, 8-10th Nov. 1942)
French counter-attack at Tafaraoui Airfield (Operation Torch, 9th Nov. 1942)
The Otranto Barrage (WW1 naval)
If the Cold War Turned Hot (Theory and what-if)
Tips from the workbench (modelling tips and ideas)
A Malta Story (a trip around the island by a wargamer)
Great War Orders of Battle pt2 (for Rapid Fire! rules)
Elite Troops (Theory and ideas for wargaming)
El Torre (SCW scenario)
Al Hanniyah (Gulf War 1991, scenario)
A Captured Gun at Gallipoli 1916 (interesting history)

Also in this issue you will found the final details and closing date for the Great SOTCW Giveaway, you have just 24 days to get your details to Russ Phillips or miss out on the chance of winning a truely huge prize (valued at over £300)
Plus all the usual review columns.

I`d like to thank everyone who contributed to this issue.

Tuesday, 18 June 2013

S&S Models - Sdkfz250/1neu

A new addition to my late-war german recce unit, Shaun`s brand spanking new 250/1 :D

Some added stowage and a funky late-war grenadier crew :rolleyes: (Mg gunner is an Esci plastic, the guy with the Stg44 is from FAA, the two guys at the back are TDQ SS grenadiers)

Tuesday, 11 June 2013

A tale of three M60s

What now seems like many years ago a young innocent editor wrote a short article comparing plastic model kits of the M60A3 tank (Journal #64); now along come our old friends at S&S and produce a resin/white metal model of the same beast. I`ve decided to reprint the original article here along with my review of the new S&S Models kit and some photos of all three models together.

I decided to build a 1990s Spanish Mechanised Cavalry unit (don’t ask why – you just don’t want to know). I already have the Mech. Infantry and their M113s but I needed a couple of M60A3 MBTs to complete the unit.

The M60A3 was the final version of the M60 of the 1960s and first appeared in the US TO&E in 1980. The tank proved very capable and versatile and served in Iraq during the first Gulf War alongside the newer M1 Abrams. The US supplied the M60A3 to several allied countries – Egypt, Turkey, Israel and of course Spain.

I wanted two kits and was lucky to find them from different manufacturers – Esci (thanks Rolf) and Revell. Having not built any kits in quite a while, I found building them an interesting challenge, so thought I share my thoughts with you all.

L-R S&S, Revell, Esci

Esci – M60 A3 (kit 8317)
This kit is quite old, one of the last set of releases by Esci. The kit has the hard plastic multi-part track link system (which I’d not tried before). The instructions are well laid out and easy to follow, there were 95 parts in total - 63 of these being the track, wheel, lower hull assembly! The track assembly actually went together quite well, I followed the advice I got from The Guild forum guys – “All the ones I have done have some larger pieces of track in them, start with these on the bottom, and work towards and round the idlers and sprockets with the smaller pieces. Once you've got round the idlers and sprockets, put the remaining large piece on the top of the wheels, and then work towards this from one end. Finish off from the other idler end to the large piece, and any snags/gaps will be hidden on the top of the track hopefully”. (Thanks John J)

The upper hull is nicely detailed and fitted well onto the lower (I only had to do a little filling); once glued you can add the tow hooks and headlights, which complete the hull. The turret is very plain as far as detail is concerned, a few periscopes, indicator lights – that’s about it. The commander’s mini-turret can swivel independently of the main; its .50cal can raise and lower as can the main gun. The turret is completed by a set of stowage baskets at the rear. I decided not to add the square searchlight mounted above the main gun (I have not seen this on any Spanish M60s). I nice kit, if a little plain, my one major criticism is that the turret hatches are moulded closed; I would have liked to mount a tank commander in the turret. To complete my model I added a tow cable, some stowage in the baskets, jerry cans hanging onto the turret sides and finally a pair of grab rails made from fuse wire along the turret sides.   
top to bottom - S&S, Revell, Esci 

Revell - M60 A3 (Kit 3140)
As soon as I opened the box I saw this was a very different animal to the other kit. A Lot more parts (185), the level of built is just totally different – the lower hull/wheel and track assembly has 121 parts alone! Again I followed John Dowman`s advice when building the track system and as it was now was my second attempt, the results were neater and the tracks looked far better.

The upper hull had more detailing than the Esci model; there were also several little tools, hooks and bits to add too. Once again the upper/lower hulls fitted together well with only a little filling required along the seams.

The turret too shows far more detailing than the Esci kit, lights, periscopes, aerials, Smoke launchers, jerry cans, and stowage lockers; grab rails and handles and a tow cable; all quite fiddly but add to the model. Where this model does get tiresome is the shear number of little parts and sub-assemblies required – where Esci`s kit has a three-part assembly for the stowage basket, this kit has seven, which makes the basket very fragile. The main gun barrel is two parts – why? This just creates a mould line down the barrel length, which then has to be carefully filed to disguise. Strangely enough with such a complex kit neither the commander’s mini-turret .50cal nor the main gun can elevate! Like the Esci kit both turrets can rotate, but this time both turret hatches can be modelled open or closed.

To complete my model I again added stowage and this time a couple of crew figures from Liberation Miniatures pack USTANK1.

Now we have the new resin/metal version from S&S Models -

M60A3 from S&S Models

First off you get a number of parts the larger ones in resin – main hull, L-R track units, turret and stowage basket. An in white metal – gun barrel, mantlet, searchlight, 2 x smoke launchers, 2 x headlight units, barrel lock, commander’s turret, turret machine gun, turret hatch; 2 x jerry can, 2 x stowage box and a commander figure.

There were a few bubbles to be filled in the resin parts and a little excess which had to be trimmed before the parts fitted properly, but nothing terrible. All the white metal parts needed trimming and cleaning too, but this had more to do with the small size of the parts. Everything assembled easily and once cleaned and the kit went together in around 15minutes – a proper wargamers model.

There is a nice level of detail to the upper hull and track units and the model looks fine next to the other M60s I already own. Size-wise the model stands a little taller than my examples by Esci and Revell (maybe 1mm) and varies in length by about the same amount - virtually nothing!

This is therefore a fine addition to the M60 models available and compatible with other 1/72nd models you may already own and far easier to build than those with that multi-part track systems.

Shaun tells me they can also do the M60A1 as well, just a new gun barrel and no smoke dischargers and stowage boxes; and are also planning the M728 and AVLB variants.

I painted all three kits US olive green and added minimal decals to the turrets – tank numbers in black (240, 241 & 242), the yellow bridge weight marker and I then painted on a Spanish flag.
I`d like to thank Rob Morgan for the pull-out he sent me from a Spanish magazine about M60 A3s in Spain.

Saturday, 8 June 2013

Humber Mk2 Armoured Car

Humber Mk2

Another Hasawaga kit bought off Will Macnally, renovated and painted up with a Airfix commander

I`ve added a decal for 6th Armoured Div. This vehicle will represent one from 1st Derbyshire Yeomanry (though to be honest i doubt they had Mk2s, probably Mk3s and Daimlers).
I couldn`t paint the green over blue square with the 44 on it for the 6th Divisions Recce Regiment.

Somua S-35

Somua S-35 du 12e GACA/RCA

Heller model (bought off Will macnally in his recent sale), repaired and altered with opened turret hatch and added AB Figures commander.

Painted up to match the others I already have as the squadron commander.


Friday, 7 June 2013

Tiger I, number 112, 1/Schwere Panzer Abteilung 501

Loosely based on various photos of Tigers in Tunisia

Hasawaga model (bought of Wil Macnally in his recent sale), altered and repaired, then painted and decaled. The crewmen are from the bits box - a plastic tanker (Esci I think) and SHQ

Thursday, 6 June 2013

Sdkfz11 mit flak38

Continuing my love affair with German SP AA guns   :lol:

A nasty shock for those pesky American gangsters  ;)

Milicast kit, Britannia gun (the Milicast one was too delicate), mixed stowage & crew (PSC, MMS and AB) with minor alterations.

Tuesday, 4 June 2013

Panzergrenadiers for Tunisia (again)

And theres more.

Kubelwagon (originally from John Dowman but repainted to match my other 69PG stuff and crewed up)

Horch field car (another of Johns, again repainted and crewed)

Horch mitt 20mm & trailer (SHQ kit and crew, gun commander is an old Esci DAK figure)